FIMAL (Paoloni) Beam Panel Saw KR32/43

BRING YOUR IDEA OF BEAM SAW TO THE NEXT LEVEL

  • linear guides and controlled axes
  • small machine dimensions
  • high ergonomicity
  • maximum precision
  • uncompromising performance

CUTTING LINE

The machine base comprises two elements, main base and secondary base, which are connected together by two side uprights. This bridge structure is capable of counteracting the forces exerted by the pressure beam and the weight of the material to cut. The main base also acts as the support for the saw carriage, which moves on two self-centring prismatic wheels along a hardened guideway located near the saw. To further guarantee perfect contact with the guideways, each prismatic wheel is combined with an opposed counterpressure wheel. The result is that any vibrations that could adversely affect the quality of the cut are eliminated.

PUSHER CARRIAGE

Positioning the pusher carriage always takes place under the direct supervision of the machine control, which uses a magnetic band reading system to detect the position.

Suitably sized precision racks and pinions ensure accurate and parallel pusher movement. The sliding table under the pusher carriage is equipped with independent idle rollers to avoid any scratching on panels with delicate surfaces.

NUMERICAL CONTROL

The numerical control guarantees the fully automatic management of the cutting patterns even if very complex, by optimizing the movement of the axes involved (pressure beam, saw carriage and side aligner).

An efficient diagnostic and troubleshooting program supplies complete messages regarding possible malfunctions, ensuring a quick solution to any problems.

In addition, controlled saw blade raising (optional) always ensures the correct saw blade protrusion from the pack being cut.

TECHNICAL DATA   KR32 KR43
MAX LENGTH OF CUT mm 3200 4300
MAXIMUM CUTTING HEIGHT mm 72 72
DEPTH OF STANDARD ELECTRONIC PUSHER mm 3300 3300
SEND/RETURN PUSHER POSITIONING SPEED m/min 0,8 – 24 / 30 0,8 – 24 / 30
PNEUMATIC CLAMPS ON PUSHER n. 5 6
MAX DEPTH OF CROSS CUT ON FRONT SIDE-FENCE mm 2000 2000
MAX DIAMETER OF MAIN BLADE / BORE / THICKNESS mm 350 / 30 / 4,4 350 / 30 / 4,4
SCORING BLADE DIAMETER / BORE / ADJUSTABLE THICKNESS mm 150 / 20 / 4,2÷4,8 150 / 20 / 4,2÷4,8
MAIN BLADE MOTOR POWER kW 7,5 7,5
SCORING BLADE MOTOR POWER kW 0,75 0,75
SEND/RETURN SAW CARRIAGE FEED SPEED m/min 1÷40 / 40 1÷40 / 40
MAIN BLADE ROTATION SPEED g/min 4000 4000
SCORING BLADE ROTATION SPEED g/min 8000 8000
DUST EXTRACTION ATTACHMENTS n. 1 – Ø 120 / 2 – Ø 100 1 – Ø 120 / 2 – Ø 100
AUTOMATIC SIDE ALIGNEMENT FOR CROSS CUTS (STROKE) mm 1200 1200
COMPRESSED AIR OPERATING PRESSURE Atm 6 6
AIR CONSUMPTION FOR EXTRACTION m.c/h 2015 2015

ON DEMAND

  • Increased pusher travel
  • Air cushion tables
  • CNC control with touch screen
  • Tables for angled cutting
  • Inverter for varying saw speed
  • Height adjustable saw raising
  • Extra grippers
  • Atomiser for saw blade lubrication
  • Post-forming with electrical adjustment